ArubaNetworks - Course and Lab Tips

Copy/Paste Text from local to remote  Copy/Paste from local to remote  You need to copy the text between local and remote devices as follows: Copy the text from your local machine as usual Press Ctrl+Alt+Shift to get the menu (don't do this on the network diagram, only on telnet / RDP sessions) on macOS, type Co ntrol+Option+Shift Paste the text in the box that shows on the menu (this copies the text to the remote server) Press Ctrl+Alt+Shift to close the menu (or do this after the next step) Right-click on the device to paste in telnet or paste normally in the remote RDP session Copy/Paste from remote to local To copy to your local machine from the remote switch reverse this: Select the text like you would with Putty Press Ctrl+Alt+Shift to get the menu (don't do this on the network diagram, only on telnet / RDP sessions) Copy text from box on menu Press Ctrl+Alt+Shift to close the menu (or do this after the next step) Paste as usual on your local PC Copy/Paste an Archive of ...

With so many AP's so close together, its best to disable your 2.4 GHz radios. When AP's are too many and too close together as often happens in LAB situations, it's best to not use your 2.4 GHz radio in ap-mode. One nice option is to change the mode of your g radio to am-mode. Disabling channel bonding on your controller's APs and interfering APs. Configure your AP's to disable channel bonding on your 5 GHz radios, this make more channels free for you and your classmates AP's to choose from. Note: it is a good idea to keep a minimum distance of at least 10 feet between APs. There is a certain amount of interference between radios even if they are running on 5GHz but different channels. you can copy and paste this into your Mobility Master console: cd /md configure terminal rf dot11a-radio-profile "default" cell-size-reduction 55 no very-high-throughput-enable no high-throughput-enable max-channel-bandwidth 20MHz ...

Dealing with PowerPoint slide deck "Title" Insanity Here is a script that will: loop through each slide you have selected in your presentation detects all shapes with TextFrames it attempts to characterize them for the probability one is actually the intended title it uses font size, frame width, height and proximity to the top of the slide sometimes a slides will not have a textFrame with the name "title" or worse... will have multiple TextFrames with the name "title" but are not a title but an integral part of your slides presented data, and cannot be moved once a probable title has been detected, the script will relocate and apply consistent formatting across all selected slides Sub positionTitleTxtBoxallslide()     Dim oSld As Slide     Dim oShp As Shape          For Each oSld In ActiveWindow.Selection.SlideRange         Dim x As Long         For x = oSld.Shapes.Count To 1 Step -1     ...